prismaequipamentos

The Tektronix P6204 is a high impedance, miniature, 10X active (FET) probe with Identify function. The probe is designed to provide maximum performance with the 11000 Series oscilloscopes and is equipped with the TEKPROBETM interface, which provides data communication between the probe and oscilloscopes and conveys power from the host instrument. Data contained within the probe informs the instrument of attenuation, model number, and serial number of the probe, and causes the input to automatically terminate with 50 Ω. The ID button on the probe head activates the Identify function in the instrument. The ID signal can also set an SRQ (Service Request) flag on an IEEE-488 bus if the instrument is programmed to do so.
The P6204 offers a variable dc offset voltage, which is controlled through the TEKPROBETM interface by the host instrument.
The P6204 has a 1.5 meter signal cable. No power cable is necessary, as power is drawn from the host instrument plug-in through the TEKPROBETM interface or through a Tektronix 1103 TEKPROBE power supply.
The miniature probe head of the P6204 is fully compatible with the Tektronix family of miniature probe accessories.
Attenuation (system): 10X ±1.5% at DC
Input resistance (system): ≥10 MΩ at DC
Input capacitance: ≤1.9 pF
Bandwidth (probe only): DC to 1 GHz
Rise time
Probe only: <350 ps
System: <490 ps
Signal delay: 8.4 ns ±200 ps
Output offset
Probe only: <10 mV
Following 11000 Series probe calibration: <2 mV
Linearity error: <2% at DC
DC thermal drift: <150 µV/°C
Output load requirement: 50 Ω ±0.5%
Maximum nondestructive input voltage: 40 Vdc continuous
Electrostatic immunity: Will withstand discharge through 1 kΩ resistance to a 500 pF capacitor charged to 10 kV
DC offset range: ±15 V accurate to ± 2% (±30 mV measured at probe output)


http://exodus.poly.edu/~kurt/manuals/manuals/Tektronix/TEK%20P6204%20Instruction.pdf