prismaequipamentos

Product Information
Supermicro motherboards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. PRODUCT FEATURES: Dual Intel 64-bit Xeon Support, up to 3.60 GHz, 800 MHz FSB; Intel E7520 (Lindenhurst) Chipset; Intel 82546GB dual-port Gigabit Ethernet Controller; Marvell 4-Port SATA Controller; 2x SATA Ports via ICH5R SATA Controller; 2 (x8) PCI-Express, 1x 64-bit 133MHz PCI-X, 1x 64-bit 100MHz PCI-X; IPMI 2.0 Socket; Zero Channel RAID Support

1. Dual Intel® 64-bit Xeon® Support,
up to 3.80 GHz, 800 MHz FSB
2. Intel® E7520 (Lindenhurst) Chipset
3. Up to 16GB DDR 333MHz (or)
Up to 32GB DDR 266MHz SDRAM
4. Intel® 82546GB dual-port Gigabit
Ethernet Controller
5. Adaptec 4-Port SATA Controller
6. 2x SATA Ports via ICH5R
SATA Controller
7. 2 (x8) PCI-Express,
1x 64-bit 133MHz PCI-X,
1x 64-bit 100MHz PCI-X
8. IPMI 2.0 Socket
9. Zero-Channel RAID Support

MBD-X6DHR-TG-B
X6DHR-TG (Bulk Pack)

Physical Stats

Form Factor
Extended ATX
Dimensions
12" x 13.05" (30.5cm x 33.2cm)

Processor/Cache

CPU
Dual 604-pin FC-mPGA4 Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus
800 MHz system bus

System Memory

Memory Capacity
Eight 184-pin DIMM sockets
Supports up to 32GB DDR 266MHz or up to 16GB DDR 333MHz memory
Dual-channel memory bus
Memory must be populated in pairs
Single-rank modules are recommended for 6+ DIMM support
Memory Type
DDR 333/266MHz buffered (registered) ECC SDRAM, 184-pin gold-plated DIMMs
DIMM Sizes
256MB, 512MB, 1GB, 2GB, 4GB**
Memory Voltage
2.5 V only
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 Single Device Data Correction (SDDC)

On-Board Devices

Chipset
Intel® E7520 chipset
MCH + ICH5R + PXH/V + 82546GB
SATA
ICH5R SATA 2-port Controller
RAID 0, 1 support
SATA
Adaptec AIC-8130: Marvell 88SX6041 4-port Hercules-2, rev C0, SATA Controller
RAID 0, 1, JBOD support
Zero-Channel RAID
Supports RAID 0, 1, 5, 10, JBOD
Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-SOZCR1
(Card not included)
IPMI
Support for Intelligent Platform
Management Interface v.2.0
(Optional: Card not included)
Network Controllers
Intel® 82546GB Dual Port Gigabit Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Super I/O
Winbond 83627HF chip

Input / Output

Serial ATA
Two ICH5R Serial ATA ports
Four Marvell Serial ATA ports
Up to Six SATA hard drives supported
IDE
Dual EIDE channels support up to four UDMA IDE devices
Floppy
1 Floppy controller
LAN
2x RJ45 LAN ports
USB
2x USB rear ports
1x USB dual internal headers supporting up to 2 USB ports
USB 2.0 Compliant
VGA
1x VGA port
Keyboard / Mouse
PS/2 keyboard and mouse ports
Serial Ports
1 Fast UART 16550 serial ports / 1 header


Chassis ( Optimized for X6DHR-TG )

1U Chassis
SC813T-500
Important Chassis Notes
To ensure system stability, a 420W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 20-pin are required]
Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.

Expansion Slots

PCI-Express / PCI-X
2 PCI-Express (x8) slots
1 PCI-X 64-bit 133MHz slot
1 PCI-X 64-bit 100MHz slot

System BIOS

BIOS Type
8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
USB Keyboard Support
Plug and Play (PnP)
SMBIOS 2.3
DMI 2.1
ACPI 1.0
Fan Speed Control

Management

Software
Optional IPMI (Intelligent Platform Management Interface) 2.0
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI/APM Power Management
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on