prismaequipamentos

indisponivel -exemplar vendido em 21-07-22

medidor de LCR 200KHz teste de parâmetro de componente Comparador TH2816B

Medidor de LCR 200KHz teste de parâmetro de componente

MARCA TONGHUI;
-MODELO TH2816B;
-MAIOR ESTABILIDADE E PRECISÃO;
-DISPLAY LCD: MATRIZ DE 240 X 64 PONTOS E ILUMINAÇÃO DE FUNDO, RESOLUÇÃO 6 DÍGITOS;
-MODOS DE MEDIÇÕES |Z|, C, L, X, B, R, G, D, Q, Θ
-RESOLUÇÃO 0.1%
-CIRCUITO EQUIVALENTE DE MEDIDA: SER (SÉRIE) E PAR (PARALELO).
-FUNÇÃO MATEMÁTICA DESVIO E PERCENTUAL DE DESVIO;
-MODOS RANGING AUTO, HOLD;-MODOS TRIGGER INTERNO, MANUAL, EXTERNO E BUS;
-VELOCIDADE DE MEDIÇÃO

BAIXA: 1.5med/seg
MÉDIA: 10med/seg
RÁPIDA: 30med/seg
-FUNÇÕES DE CORREÇÃO ABERTA, CURTA E CORREÇÕES DA CARGA;
-MEDIÇÕES DE TERMINAL 5 TERMINAIS;
-DELAY TIME 0~60 SEG, COM STEP DE 1ms ;
-LIST SWEEP PARA ACIMA DE 4 FREQUÊNCIAS, NÍVEIS DE SINAL E NÍVEIS DE POLARIZAÇÃO DC;

-TESTE DE FREQUÊNCIA

50Hz, 60Hz, 80Hz, 100Hz, 120Hz,
150Hz, 200Hz, 250Hz, 300Hz, 400Hz,
500Hz, 600Hz, 800Hz, 1kHz, 1.2kHz,
1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz,
5kHz, 6kHz, 8kHz, 10kHz, 12kHz,
15kHz, 20kHz, 25kHz, 30kHz, 40kHz,
50kHz, 60kHz, 80kHz, 100kHz,
120kHz, 150kHz, 200kHz

-FUNÇÃO COMPARAÇÃO RESULTADOS: NG (REPROVADO); P1 (APROVADO NO LIMITE AJUSTADO 1); P2 (APROVADO NO LIMITE AJUSTADO 2); P3 (APROVADO NO LIMITE AJUSTADO 3); AUX (REPROVADO SOMENTE EM Q OU D).
- BUZINA: ON OU OFF
- CONTROLE: INTERFACE ENTRADA / SAÍDA PARA AUTOMATIZAÇÃO
-IMPEDÂNCIA DE SAÍDA 30Ω OU 100Ω;
-TENSÃO DE TESTE 10mVrms ~ 2.0Vrms, 10mV steps;
-RANGE DE MEDIÇÕES
|Z|, R,X 0.00001Ω — 99.9999MΩ
C 0.00001pF — 999.999mF
L 0.00001μH — 9.99999kH
G,B 0.00001μS — 999.999S
D 0.00001 — 9.99999
Q 0.00001 — 99999.9
θ(DEG) -179.999º — 179.999º
θ(RAD) -3.14159 — 3.14159
Δ% -999.999% — 999.999%

DISPLAY PRIMÁRIO

- INDUTÂNCIA (L)
- CAPACITÂNCIA (C)
- RESISTÊNCIA (R)

DISPLAY SECUNDÁRIO

- DISSIPAÇÃO (D);- FATOR DE QUALIDADE (Q);
- RESISTÊNCIA SÉRIE EQUIVALENTE (ESR);
- RESISTÊNCIA PARALELA EQUIVALENTE (EPR);
- DISSIPAÇÃO EM PPM;
- FATOR DE QUALIDADE EM PPM;
- DELTA %;

-TEMPERATURA OPERACIONAL -UMIDADE DE FUNCIONAMENTO
-ACOMPANHA MANUAL DE INSTRUÇÕES, CABO DE ALIMENTAÇÃO,

ACESSÓRIO DE TESTE PONTA DE PROVA COM GARRA JACARÉ E

ACESSÓRIO DE CONEXÃO DIRETA COMPONENTE;

-GARANTIA 6 MESES;
-ALIMENTAÇÃO 110-220VAC;

-DIMENSÕES DO EQUIPAMENTO (W × H × D) 350 mm×122mm×418mm

-PESO 8Kg JÁ EMBALADO dimençao da caixa 51 x 45 x 27

TH2816B is a new precision LCR meter combined
with years of technical experience and newest measurement technology of
instrument industry. With powerful measurement functions, high performance
and low cost, TH2816B have been one of the world
advanced instruments, and it provides users a super value measurement
resolution and experience. The meter offers stable 6 digit resolution, wide
frequency range (50Hz to 200kHz), programmable signal level (0.01V to 2.0V),
up to 30 meas/sec measurement rate, 9 measurement ranges, 30Ω or 100Ω constant output
impedance and friendly operation interface. TH2816B can
be used for incoming inspection of components, quality control of product line
and high accuracy laboratory use. The optional HANDLER, GPIB, RS232C interfaces
make it easy to build an automatic component test system, communicate with
the computer and record the test results.

Features:

■ 240×64 dot-matrix graphics LCD display
■ Friendly user's interface and easy operation
■ TH2816B: 37 typical frequency points, 50-200kHz
■ Programmable single-voltage level from 10mVrms to 2.0Vrms
■ World-level stability and accuracy
■ 6 digit readout resolution
■ Up to 30meas/sec Measurement rate
■ Precision LOAD correction function
■ Selectable signal source output impedances: 30Ω, 100Ω
■ Direct control function for TH1773/TH1775 DC bias source
■ List sweep function for up to 4 frequencies, signal levels and DC bias levels
■ Direct, Δ ABS and Δ% display modes
■ 12 control setting files memory
■ Built-in comparator, 10 Bins and bin counters (EZ2816A/B)
■ Test signal level monitor function
■ Key lock function
■ Optional Handler interface
■ RS-232C and optional GPIB interfaces

Specifications:

Measurement function:
Test parameter: |Z|, C, L, X, B, R, G, D, Q, θ
Basic accuracy: 0.1%
Equivalent circuit: Series and Parallel
Math function: Deviation and Percent Deviation
Ranging mode: Auto, Hold
Trigger mode: Internal, Manual, External and Bus
Measuring speed:
Slow: 1.5meas/sec
Med: 10meas/sec
Fast: 30meas/sec
Correction function: Open, Short and Load corrections
M e a s u r e m e n t terminal: 5 terminals
Delay time: 0—60sec , with step of 1ms
List sweep: List sweep for up to 4 frequencies, signal levels and DC bias levels
Display Mode: Direct, ΔABS, Δ%, V/I( V/I monitor), Bin number and bin counter
Display: 240×64 dot-matrix LCD display, 6-digit resolution

Test signal:
Signal frequency:
50Hz to 200kHz , total 37 points;
50Hz, 60Hz, 80Hz, 100Hz, 120Hz,
150Hz, 200Hz, 250Hz, 300Hz, 400Hz,
500Hz, 600Hz, 800Hz, 1kHz, 1.2kHz,
1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz,
6kHz, 8kHz, 10kHz, 12kHz, 15kHz,
20kHz, 25kHz, 30kHz, 40kHz, 50kHz,
60kHz, 80kHz, 100kHz, 120kHz, 150kHz,
200kHz

Output impedance: 30Ω , 100Ω
Test level: 10mVrms to 2.0Vrms, 10mV steps

Measurement display range:
|Z|, R,X 0.00001Ω — 99.9999MΩ
C 0.00001pF — 999.999mF
L 0.00001μH — 9.99999kH
G,B 0.00001μS — 999.999S
D 0.00001 — 9.99999
Q 0.00001 — 99999.9
θ(DEG) -179.999o — 179.999o
θ(RAD) -3.14159 — 3.14159
Δ% -999.999% — 999.999%

Comparator, memory & interface:
Comparator Function: 10 Bins(BIN1 to BIN9 , OUT of bins), and additional AUX bin

Memory 12 control settings memory for store/recall
Optional Interface RS-232C, HANDLER, GPIB

Instrument Accessories:
TH26005A 4 terminal test fixture
TH26011A 4 terminal Kelvin test clip leads
TH26010 Gilded shorting plate

Optional: NO INCLUSE
TH26047 4 terminal test fixture
TH26048 4 terminal test fixture
TH26006 Axial component test fixture
TH26007 Core inductor test fixture
TH26008A SMD component test fixture
TH26009B SMD Kelvin test tweezers
TH26033 GPIB interface cable
TH26034 RS232C interface cable
TH10001 GPIB interface board
TH12003 RS232C control software(TH2816A)
TH12004 RS232C control software(TH2817A)